BTGVX - VINYL ALCOHOL/VINYL BUTYRAL COPOLYMER, 381

Product Identification

Product ID:VINYL ALCOHOL/VINYL BUTYRAL COPOLYMER, 381
MSDS Date:07/01/1993
FSC:9330
NIIN:00N043700
MSDS Number: BTGVX

Responsible Party
SCIENTIFIC POLYMER PRODUCTS INC
6265 DEAN PARKWAY
ONTARIO, NY 14519
US

Emergency Phone: 716-265-0413

Info Phone: 716-265-0413

Cage: 0MWG0

Contractor
SCIENTIFIC POLYMER PRODUCTS INC
ONTARIO, NY 14519 US

Telephone: 716-265-0413

Cage: 0MWG0

Ingredients

VINYL ALCOHOL/VINYL BUTYRAL COPOLYMER

CAS: 27360-07-2

Fraction By Weight: 97%

OSHA PEL N/K

ACGIH TLV: N/K


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 30%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY IRRITATE NOSE, THROAT, AND MUCOUS
MEMBRANES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:IN ALL CASES, IF IRRITATION DEVELOPS, SEEK MEDICAL
ASSISTANCE. INHAL: REMOVE FROM EXPOSURE. IF BREATHING STOPS, BEGIN
MOUTH TO MOUTH. EYES: FLUSH WITH WATER FOR AT LEAST 15 MIN. SKIN:
WASH AFFECTED AR EA WITH SOAP AND WATER. REMOVE DIRTY CLOTHING.
INGEST: CALL MD IMMEDIATELY .

Fire Fighting

Extinguishing Media:WATER FOG, DRY CHEMICAL, CO2, ALCOHOL-TYPE FOAM FOR
LARGE FIRES. WATER FOG WILL REDUCE INTENSITY OF FLAME.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TO REDUCE POTENTIAL EXPLOSION HAZARD,
AVOID DISPERSION OF DUST IN AIR.

Accidental Release

Spill Release Procedures:SWEEP UP SPILL AND PLACE IN SUITABLE CONTAINER
FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:GOOD HYGIENE PRACTICES SHOULD BE
STRICTLY FOLLOWED. STORE IN A COOL, DRY PLACE AWAY FROM DIRECT
SUNLIGHT OR OTHER SOURCES OF HEAT.
Other Precautions:AVOID CONTACT WITH EYES, SKIN AND CLOTHING. WASH
THOROUGHLY AFTER HANDLING. AVOID BREATHING DUST. NOTE: THIS MATL IS
INTENDED FOR LABORATORY USE ONLY. IT IS NOT SOLD OR INTENDED FOR
DRUG, HOUSEHOLD OR OTHER USES.

Exposure Controls

Respiratory Protection:IF NEEDED. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:>284F,>140C
Vapor Density:1.1 @ 20C
Spec Gravity:1.12
Solubility in Water:SLIGHT
Appearance and Odor:WHITE, GRANULAR POWDER, MILD ESTER-LIKE ACETAL
ODOR.
Percent Volatiles by Volume:1.5

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:WILL DEGRADE AND CHAR ABOVE 200C.
Hazardous Decomposition Products:BUTYRIC ACID, ACROLEIN, BUTYRALDEHYDE,
CROTONALDEHYDE IN TRACE AMOUNTS; CARBON MONOXIDE.

Disposal

Waste Disposal Methods:LANDFILL OR INCINERATE AS PERMITTED BY
APPLICABLE FEDERAL, STATE OR LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.